The actual product may differ slightly from the image.
We offer blanking disks for closing tubes suitable for any types or series and pressure ranges. On request, they are also available with throttle boring for flow regulation.
Advantages & functions
- For assembly between tongue and groove part
- For all types and pressure ranges
- Range of application from -270 °C up to +650 °C dependent on the material used
- Also available in other DIN EN materials
M1 Series Component 8 for pressures up to PN 100:
DN | h3 | Order number |
4 | 1,5 | M1-4-8 |
6 | 1,5 | M1-6-8 |
8 | 1,5 | M1-8-8 |
10 | 1,5 | M1-10-8 |
12 | 1,5 | M1-12-8 |
16 | 1,5 | M1-16-8 |
20 | 2,0 | M1-20-8 |
25 | 2,0 | M1-25-8 |
32 | 2,2 | M1-32-8 |
40a | 2,8 | M1-40a-8 |
40 | 3,0 | M1-40-8 |
50 | 3,5 | M1-50-8 |
J1 Series Component 8 for pressures up to PN 100:
DN | h3 | Order number |
4 | 1,5 | J1-4-8 |
6 | 1,5 | J1-6-8 |
8 | 1,5 | J1-8-8 |
10 | 2 | J1-10-8 |
12 | 2 | J1-12-8 |
16 | 2 | J1-16-8 |
20 | 2 | J1-20-8 |
25 | 2,2 | J1-25-8 |
32 | 3,5 | J1-32-8 |
40 | 3,5 | J1-40-8 |
50 | 3,5 | J1-50-8 |
M2 Series Component 8 for pressures up to PN 200:
DN | h3 | Order number |
3 | 1,5 | M2-3-8 |
4 | 1,5 | M2-4-8 |
6 | 1,5 | M2-6-8 |
8 | 2 | M2-8-8 |
10 | 2 | M2-10-8 |
12 | 2 | M2-12-8 |
16 | 2 | M2-16-8 |
20 | 2,5 | M2-20-8 |
25 | 3 | M2-25-8 |
32 | 3,5 | M2-32-8 |
40 | 3,9 | M2-40-8 |
50 | 4,7 | M2-50-8 |
J2 Series Component 8 for pressures up to PN 250:
DN | h3 | Order number |
3 | 1,5 | J2-3-8 |
4 | 1,5 | J2-4-8 |
6 | 1,5 | J2-6-8 |
8 | 2 | J2-8-8 |
10 | 2 | J2-10-8 |
12 | 2 | J2-12-8 |
16 | 2 | J2-16-8 |
20 | 2,5 | J2-20-8 |
25 | 3 | J2-25-8 |
32 | 3,5 | J2-32-8 |
40 | 5 | J2-40-8 |
M3 Series Component 8 for pressures up to PN 320:
DN | h3 | Order number |
3 | 1,5 | M3-3-8 |
4 | 1,5 | M3-4-8 |
5 | 2 | M3-5-8 |
6 | 2,5 | M3-6-8 |
8 | 2,5 | M3-8-8 |
10 | 3 | M3-10-8 |
12 | 3 | M3-12-8 |
16 | 3,5 | M3-16-8 |
20 | 4 | M3-20-8 |
25a | 4,5 | M3-25a-8 |
25 | 4,5 | M3-25-8 |
32 | 5 | M3-32-8 |
J3 Series Component 8 for pressures up to PN 320:
DN | h3 | Order number |
3 | 1,5 | J3-3-8 |
4 | 1,5 | J3-4-8 |
5 | 2 | J3-5-8 |
6 | 2,5 | J3-6-8 |
8 | 2,5 | J3-8-8 |
10 | 3 | J3-10-8 |
12 | 3 | J3-12-8 |
16 | 3,5 | J3-16-8 |
20 | 4 | J3-20-8 |
25 | 4,5 | J3-25-8 |
32 | 5 | J3-32-8 |
MH1 Series Component 8 for pressures up to PN 100:
DN | h3 | Order number |
3 | 1,5 | MH1-3-8 |
4 | 1,5 | MH1-4-8 |
6 | 2 | MH1-6-8 |
8 | 2 | MH1-8-8 |
10 | 2 | MH1-10-8 |
12 | 2 | MH1-12-8 |
16 | 2,5 | MH1-16-8 |
20 | 3 | MH1-20-8 |
25 | 3,5 | MH1-25-8 |
32 | 3,9 | MH1-32-8 |
40 | 4,7 | MH1-40-8 |
JH1 Series Component 8 for pressures up to PN 100:
DN | h3 | Bestellzeichen |
3 | 1,5 | JH1-3-8 |
4 | 1,5 | JH1-4-8 |
6 | 2 | JH1-6-8 |
8 | 2 | JH1-8-8 |
10 | 2 | JH1-10-8 |
12 | 2 | JH1-12-8 |
16 | 2,5 | JH1-16-8 |
20 | 3 | JH1-20-8 |
25 | 3,5 | JH1-25-8 |
32 | 3,9 | JH1-32-8 |
40 | 4,7 | JH1-40-8 |
M6 Series for pressures up to PN 640:
DN | h3 | Order number |
4 | 3 | M6 - 4 - 8 |
6 | 3,5 | M6 - 6 - 8 |
8 | 4 | M6 - 8 - 8 |
10 | 4,5 | M6 - 10 - 8 |
12 | 5,5 | M6 - 12 - 8 |
16 | 5,5 | M6 - 16 - 8 |
20 | 6 | M6 - 20 - 8 |
25 | 6,5 | M6 - 25 - 8 |
M10 Series for pressures up to PN 1000:
DN | h3 | Order number |
4 | 4 | M10 - 4 - 8 |
6 | 4,5 | M10 - 6 - 8 |
8 | 5 | M10 - 8 - 8 |
10 | 6 | M10 - 10 - 8 |
12 | 6 | M10 - 12 - 8 |
16 | 6,5 | M10 - 16 - 8 |
20 | 7 | M10 - 20 - 8 |
Technical data
| Nominal pressure (in bar) Nominal pressure (in bar) | 100 PN | |
| Nominal width (in mm) Nominal width (in mm) | 6 DN | |
| h3 h3 | 1.5 mm | |
| Material according to DIN EN Material according to DIN EN | 1.4571 | |
| Material description Material description | Stainless steel |
Technical drawing
