The actual product may differ slightly from the image.
2 l Gas cylinder
05-1144-R005
- Volume
- 2 l
- Storage
- liquid / gaseous
The pressurised gas cylinder is fitted with a brass valve in accordance with DIN 477 No. 6 and has a test pressure of PH300 bar. Manufactured in accordance with TRG, with TÜV approval including a TÜV certificate, and gas cylinder marking in accordance with DIN EN 1089-3.
Suitable for use with all standard arc quenching and insulating gases.
Standard version
- Valve DIN 477 No. 6 (W21.8 x 1/14")
- Brass valve, without non-return valve
Technical data
| Volumne | 2 l | |
| Outside diameter | 100 mm approx. | |
| Length | 365 mm without valve | |
| Weight | 4.9 kg net | |
| Test pressure | 300 bar |
Delivered with a transport fill of N₂ (nitrogen) and without a label. The pressurised gas cylinder does not have a protective cap. After filling, the operator must affix a label to the cylinder in accordance with ADR.
This depends on the gas type and quality. For further information, see F-Gas 2024/573.
Caution regarding SF6: If the gas quality cannot be determined or if the SF6 gas contains decomposition products (≥250 ppmv SO2), cylinders with a yellow shoulder and hazard labels 2.3 + 8 must be used for road transport.
Periodic inspection:
Periodic inspections in accordance with ADR must be carried out every 10 years on pressure vessels used for the transport of gases with classification code 2A. The user of the cylinders is responsible for this. Country-specific regulations must be observed. DILO will be happy to assist you with ADR inspections.
