The actual product may differ slightly from the image.
DILO high pressure hoses are the right solution for liquids and applicable for high pressure use. The hoses withstand pressures of up to PN 320 without any problems.
Advantages & functions
- Range of temperature from -40 °C to +100 °C (see DIN EN 853/856)
- All hoses are vacuum-tight
- Materials and composition
- The hoses consist of an internal layer made of synthetic rubber which is oil- and water- proof and of an external rubber layer which is oil- and weatherproof. Rubber hose reinforced with wire braid.
- Fitting material
- Standard: DIN EN material number 1.0460. DIN EN material number 1.4571 on request. The hose fitting is made in pressnipple form.
- Application only for liquids
M1S Series for pressures up to PN 100:
DN | d | d25* | d3 | s3 | Banding radius | Order number** |
8 | 6,4 | 4 | M 18x1,5 | 22 | 100 | M1S8L |
10 | 7,9 | 5,5 | M 20x1,5 | 24 | 115 | M1S10L |
12 | 9,5 | 7 | M 22x1,5 | 27 | 130 | M1S12L |
16 | 12,7 | 10 | M 26x1,5 | 32 | 180 | M1S16L |
20 | 15,9 | 13 | M 30x1,5 | 36 | 200 | M1S20L |
25 | 19 | 15,5 | M 36x2 | 41 | 240 | M1S25L |
32 | 25,4 | 21 | M 45x2 | 50 | 300 | M1S32L |
40 | 38,1 | 32 | M 56x2 | 65 | 560 | M1S40L |
50 | 50,8 | 42 | M 68x2 | 75 | 710 | M1S50L |
J1S Series for pressures up to PN 100:
DN | d | d25* | d3 | s3 | Banding radius | Order number** |
8 | 6,4 | 4 | M 18x1,5 | 22 | 100 | J1S8L |
10 | 9,5 | 7 | M 22x1,5 | 27 | 130 | J1S10L |
12 | 12,7 | 10 | M 24x1,5 | 30 | 180 | J1S12L |
16 | 15,9 | 13 | M 30x2 | 36 | 200 | J1S16L |
20 | 19 | 15,5 | M 36x2 | 41 | 140 | J1S20L |
25 | 25,4 | 21 | M 45x2 | 50 | 300 | J1S25L |
32 | 31,8 | 27 | M 52x2 | 60 | 420 | J1S32L |
40 | 38,1 | 32 | M 60x2 | 70 | 560 | J1S40L |
50 | 50,8 | 42 | M 72x2 | 80 | 710 | J1S50L |
M2S Series for pressures up to PN 200:
DN | d | d25* | d3 | s3 | Banding radius | Order number** |
6 | 6,4 | 4 | M 18x1,5 | 22 | 100 | M2S6L |
8 | 7,9 | 5,5 | M 20x1,5 | 24 | 115 | M2S8L |
10 | 9,5 | 7 | M 22x1,5 | 27 | 130 | M2S10L |
12 | 12,7 | 10 | M 24x1,5 | 30 | 180 | M2S12L |
16 | 15,9 | 13 | M 30x2 | 36 | 200 | M2S16L |
20 | 19 | 15,5 | M 36x2 | 46 | 240 | M2S20L |
25 | 25,4 | 21 | M 42x2 | 50 | 350 | M2S25L |
32 | 31,8 | 27 | M 52x2 | 60 | 460 | M2S32L |
40 | 38,1 | 32 | M 56x2 | 65 | 560 | M2S40L |
50 | 50,8 | 42 | M 68x2 | 80 | 710 | M2S50L |
J2S Series for pressures up to PN 250:
DN | d | d25* | d3 | s3 | Banding radius | Order number** |
6 | 6,4 | 4 | M 18x1,5 | 22 | 100 | J2S6L |
8 | 7,9 | 5,5 | M 20x1,5 | 24 | 115 | J2S8L |
10 | 9,5 | 7 | M 22x1,5 | 27 | 130 | J2S10L |
12 | 12,7 | 10 | M 24x1,5 | 30 | 180 | J2S12L |
16 | 15,9 | 13 | M 30x2 | 36 | 200 | J2S16L |
20 (215 bar) | 19 | 15,5 | M 36x2 | 46 | 240 | J2S20L |
25 | 25,4 | 21 | M 45x2 | 55 | 350 | J2S25L |
32 | 31,8 | 27 | M 52x2 | 60 | 460 | J2S32L |
40 (200 bar) | 38,1 | 32 | M 64x2 | 75 | 560 | J2S40L |
M3S Series for pressures up to PN 320:
DN | d | d25* | d3 | s3 | Banding radius | Order number** |
5 | 6,4 | 4 | M 18x1,5 | 24 | 100 | M3S5L |
6 | 7,9 | 5,5 | M 20x1,5 | 27 | 115 | M3S6L |
8 | 9,5 | 7 | M 22x1,5 | 30 | 130 | M3S8L |
10 | 12,7 | 10 | M 24x1,5 | 32 | 190 | M3S10L |
12 | 15,9 | 13 | M 30x2 | 36 | 200 | M3S12L |
16 | 19 | 15 | M 36x2 | 46 | 280 | M3S16L |
20 | 25,4 | 20 | M 42x2 | 50 | 350 | M3S20L |
J3S Series for pressures up to PN 320:
DN | d | d25* | d3 | s3 | Banding radius | Order number** |
4 | 6,4 | 3 | M 16x1,5 | 22 | 90 | J3S4L |
5 | 6,4 | 4 | M 18x1,5 | 24 | 100 | J3S5L |
6 | 7,9 | 5,5 | M 20x1,5 | 27 | 115 | J3S6L |
8 | 9,5 | 7 | M 22x1,5 | 30 | 130 | J3S8L |
10 | 12,7 | 10 | M 27x2 | 36 | 190 | J3S10L |
12 | 15,9 | 13 | M 33x2 | 41 | 200 | J3S12L |
16 | 19 | 15 | M 39x2 | 46 | 280 | J3S16L |
20 | 25,4 | 21 | M 48x2 | 55 | 350 | J3S20L |
* Smallest diameter of the hose fitting.
** When ordering please specify the desired nominal length.
Material:
Material number | Material | AISI material | DILO material code |
1.0460 | P250GH | 1022M | A |
1.4571 | X6CrNiMoTi17-12-2 | 316 Ti | C |
Technical data
| Nominal pressure (in bar) | 320 PN | |
| Nominal width (in mm) | 6 DN | |
| d | 7.9 mm | |
| d25* | 5.5 mm | |
| d3 | M 20x1.5 | |
| s3 | 27 Wrench size | |
| Bending radius | 115 mm | |
| Hose length | 5 m | |
| Material according to DIN EN | 1.4571 | |
| Material description | Stainless steel |
Technical drawing
